Precision Metrology: New and Use Equipment

Solve Metrology provides new or used metrology equipment for your most demanding measurement applications. Working with a number of equipment manufacturers allows us to provide the best technology for your application and budget. In many cases we can upgrade your current equipment with state of the art controls and analysis software, bringing new life to your existing gages at a fraction of the cost. We are continually researching new technologies to keep our customers on the leading edge and reduce their inspection costs.

We support the equipment we sell with personalized calibration, repair, and training services. We understand that our success depends on keeping your inspection lab running and your costs low

Some of our partner manufacturers include:

Use Equipment

Mahr Federal MarForm MMQ 6200

Application

• With motor-driven gage head stand and convenient, variable-speed joystick
• Medium to large parts
• Equally at home on the shop-floor or lab
• Touch screen control
• Mahr Federal Windows®-based software

Satisfies most form analysis situations

• Precision, 220mm/8.6in mechanical bearing spindle
• Integral tilt and centering table
• Shock-absorbing heavy duty base for stability
• Motorized gage head stand with variable-speed joystick
• Lever type gage head
• Windows Operating System and Mahr Federal’s proven Metrology Software Package
• Color monitor with touch screen control
• 100mm/4in built-in thermal printer
• Available as 120 or 220 Volts 50/60 Hz

Starrett Crystal Pink Surface Plate 18x24

Accurate for use in metrology laboratories and wear resistant for use in abrasive shop environments.

Crystal Pink is the finest, most durable granite surface plate available to industry today. The name is derived from the fact that it has the highest crystalline quartz content of any granite surface plate.

Surface Finish

• Even distribution of large quartz crystals provides a smooth finish which virtually eliminates wear on the surface plate and the instruments used on it. This fine micro-finish, combined with the natural voids in the surface, prevents wringing & provides a velvety-smooth tool action.

Wear Life

• Our experience with surface plate performance in customers' plants shows that non-quartz-bearing granite in average daily use requires relapping about once a year. Crystal Pink plates used in these same plants have only required relapping once every three to five years.
• Meets or exceeds U.S. Federal Specification GGG-P-463C for flatness
• Great surface hardness & wear resistance – the highest percentage of quartz crystals of any granite plate
• Smooth, jewel-like quartz bearing points protect accuracy and finish of both the surface & the tools used on it
• Quality and economy combined
• Comparable to black granite plates while outwearing them as much as 5 to 1
• Meets or exceeds 50 lb. per square foot (24kg per 1,000 sq. cm) load bearing specifications. Available in 100 lb. (45kg) test series

Other Used and off-lease equipment currently available:

• Mahr MMQ100 roundness system
• Mahr Pocket Surf III surface finish gage
• Sheffield Spectra IndiRon roundness system
• Mahr XC10 Contour Measurement system
• FAG MBG30 Form Measurement System